GPI® G8P
SKU 147000-01 | MODEL G8P-012-MU
Original price $399.99 - Original price $399.99
Original price
$399.99
$399.99 - $399.99
Current price $399.99
| /
Fluid Statement
Gasoline up to E15 | Diesel Fuel up to B20 | Kerosene
GPI G8P fuel transfer pump is ideal for on-the-go fueling for off-road and marine vehicles, landscaping, light industrial, and more. Delivering flow rates up to 8 GPM (30 L/min), connected to a DC power source can fuel virtually any petroleum-powered vehicle or equipment, anywhere. The G8P is 20% lighter than similar portable pumps, and its comfort grip handle provides increased maneuverability when you need it most.
Features & Benefits
- 20% lighter portable pump with comfort grip handle. Experience gas station convenience where ever you are.
- Approved for use with gasoline (alcohol blends to E15), diesel fuel (bio-diesel blends to B20) and kerosene.
- Factory installed power cord with in-line switch eliminates installation hassles.
- Self-priming, low maintenance rotary gear pump design for ease of use and long pump life.
- Powder coated body to prevent rust and survive all weather conditions
- Steel stability base with rubber feet.
Specifications
- Input:
- 12V (DC)
- Fuse:
- 15 amps
- Type:
- Rotary Gear
- Motor RPMs:
- 1100
- Motor HP:
- 1/10
- Flow Rate:
- 8 GPM (30 L/min)
- Duty Cycle:
- 15 min on / 30 min off
- Working Pressure:
- 10 PSI (0.69 bar)
- Max Working Temperature:
- -20° F to 125° F (-29° C to 52° C)
- Inlet:
- 3/4 in. FNPT
- Outlet:
- 3/4 in. FNPT
- Mounting Type:
- Portable
- Suction Pipe:
- 8 FT. Suction hose with strainer
- Power Cord:
- 12 ft. (3.6m), 14/2 AWG, Factory installed, Battery Clamps
- Dispensing Hose:
- 8 ft. (2.4m) x 3/4 in. MNPT
- Nozzle:
- 3/4 in. FNPT Inlet, Manual Shut-off, Unleaded
- Housing:
- Corrosion-Resistant Aluminum
- Warranty:
- 2-yr pump warranty
- UPC:
- 031401006728
Also Available At
Manuals / Documents
Applications
What's in the Box
G8P 12V 8 GPM Fuel Transfer Pump, Manual shut-off unleaded nozzle, Dispensing hose w/static wire, Suction hose w/strainer, Factory-installed power cord w/alligator clips, Owners manual
G8P Parts & Accessories
-
Original price $28.00 - Original price $28.00
Original price
$28.00
$28.00 - $28.00
Current price $28.00
| /
Handle Bracket Replacement Kit for G8P Fuel Transfer Pumps
in stock
Keep your portable G8P fuel transfer pump in tip-top condition with this handle bracket replacement kit.
Original price $28.00 - Original price $28.00
Original price
$28.00
$28.00 - $28.00
Current price $28.00
| /
-
Original price $27.00 - Original price $27.00
Original price
$27.00
$27.00 - $27.00
Current price $27.00
| /
Complete Overhaul Kit for G8P Portable Fuel Transfer Pump
in stock
GPI Overhaul kit for use with G8P Portable Fuel Transfer Pump. Includes motor shaft seal, pump gears, bypass poppet parts, and replacement o-rings.
Original price $27.00 - Original price $27.00
Original price
$27.00
See Alsohansgrohe Overhead showers: Croma Select S, 2 spray modes, Art. no. 04388000hansgrohe Overhead showers: Raindance Select S, 2 spray modes, Art. no. 047200008 GPM Pressure WashersVolume Flow - Online Unit Converter$27.00 - $27.00
Current price $27.00
| /
-
Original price $85.00 - Original price $85.00
Original price
$85.00
$85.00 - $85.00
Current price $85.00
| /
Power Cord Replacement Kit for G8P Fuel Transfer Pumps
Only 2 left!
It's a snap to replace the G8P fuel transfer pump power cord assembly with this easy-to-install kit
Original price $85.00 - Original price $85.00
Original price
$85.00
$85.00 - $85.00
Current price $85.00
| /
-
Original price $25.00 - Original price $25.00
Original price
$25.00
$25.00 - $25.00
Current price $25.00
| /
Base Bracket Replacement Kit for G8P Fuel Transfer Pumps
in stock
Keep your portable G8P fuel transfer pump in tip-top condition with this base bracket replacement kit.
Original price $25.00 - Original price $25.00
Original price
$25.00
$25.00 - $25.00
Current price $25.00
| /
-
Original price $23.00 - Original price $23.00
Original price
$23.00
$23.00 - $23.00
Current price $23.00
| /
Filter Adapter Installation Kit
in stock
Complete your filter setup with GPI's filter installation kit. The kit includes one pipe nipple 3/4 in. x 4 in., two pipe bushings and a roll of pi...
View full details
Original price $23.00 - Original price $23.00
Original price
$23.00
$23.00 - $23.00
Current price $23.00
| /
-
Original price $47.00 - Original price $47.00
Original price
$47.00
$47.00 - $47.00
Current price $47.00
| /
Heavy Duty Battery Clamp Kit for 12-Volt Fuel Transfer Pumps
in stock
GPI Heavy Duty Battery Clamps (#133263-01) are designed with heavy copper terminals and vinyl-clad handles. Each clamp includes a terminal and scre...
View full details
Original price $47.00 - Original price $47.00
Original price
$47.00
$47.00 - $47.00
Current price $47.00
| /
-
Original price $20.00 - Original price $20.00
Original price
$20.00
$20.00 - $20.00
Current price $20.00
| /
18 GPM, 10 Micron Particulate Filter
in stock
GPI 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.NOTE: May substitute for a fi...
View full details
Original price $20.00 - Original price $20.00
Original price
$20.00
$20.00 - $20.00
Current price $20.00
| /
-
Original price $27.00 - Original price $27.00
Original price
$27.00
$27.00 - $27.00
Current price $27.00
| /
3/4-inch NPT, 18 GPM Filter Aluminum Adapter
in stock
Use GPI 3/4-inch NPT Cast aluminum filter adapter to complete your filter installation setup on your fueling system. Protect your pump today with G...
View full details
Original price $27.00 - Original price $27.00
Original price
$27.00
$27.00 - $27.00
Current price $27.00
| /
-
Original price $47.00 - Original price $47.00
Original price
$47.00
$47.00 - $47.00
Current price $47.00
| /
3/4-Inch NPT, UL® Listed, Manual Shut-off, Unleaded Fuel Nozzle
in stock
GPI's 3/4-inch NPT Black Diamond no-fail manual nozzle is the most durable, best performance nozzle on the market! Designed to last a lifetime.
Original price $47.00 - Original price $47.00
Original price
$47.00
$47.00 - $47.00
Current price $47.00
| /
-
Original price $60.00 - Original price $60.00
Original price
$60.00
$60.00 - $60.00
Current price $60.00
| /
18 GPM, 10 Micron Particulate Filter Kit with 3/4-inch NPT Aluminum Adapter
In stock
GPI Particulate Filter Kit for electric fuel transfer pumps. It helps remove dirt, dust, rust, and other common fuel contaminants to protect your f...
View full details
Original price $60.00 - Original price $60.00
Original price
$60.00
$60.00 - $60.00
Current price $60.00
| /
-
Original price $47.00 - Original price $47.00
Original price
$47.00
$47.00 - $47.00
Current price $47.00
| /
3/4-inch Fuel Hose Swivel
in stock
GPI Multi-Plane Hose Swivel attaches between a fuel hose and nozzle, providing 360 spherical rotation. The lightweight swivel prevents hose twistin...
View full details
Original price $47.00 - Original price $47.00
Original price
$47.00
$47.00 - $47.00
Current price $47.00
| /
-
Original price $48.00 - Original price $48.00
Original price
$48.00
$48.00 - $48.00
Current price $48.00
| /
Pressure Vent Cap Assembly
in stock
Includes cap and 2-inch NPT cast iron base adapter.The vent cap is equipped with valves that automatically compensate for changes of internal tank...
View full details
Original price $48.00 - Original price $48.00
Original price
$48.00
$48.00 - $48.00
Current price $48.00
| /
-
Original price $20.00 - Original price $20.00
Original price
$20.00
$20.00 - $20.00
Current price $20.00
| /
Battery Clamp Kit for 12-Volt Fuel Transfer Pumps
in stock
The GPI Battery Clamp Kit (#902010-51) is designed to quickly and conveniently connect a 12 V(dc) fuel transfer gear pump to a DC power supply. Inc...
View full details
Original price $20.00 - Original price $20.00
Original price
$20.00
$20.00 - $20.00
Current price $20.00
| /
Customer Reviews
Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jesus Olivares
GPI 8 GPM 12V Fuel Transfer Pump
Thanks for the great review, Jesus!
Have a great day!
Great Plains Industries
M
Mario Contreras
Very very excellent product
That’s a very easy product to install. Very nice quality.
Thanks for the great review and feedback, Mario! We appreciate your business.
Have a great day!
Customer Support
M
Molle
Awesome product.
